6ES7135-6FB00-0BA1
Увеличить
Краткое описание:
SIMATIC ET 200SP, Analog output module, AQ 2xU Standard
Дополнительная информация
Analog output module, 2 channels, universal use. Pack quantity: 1 unit, suitable for BU type A0, A1 BaseUnits, Color code CC00, Module diagnostics, 16 bit resolution.
| MSO | No |
| Depth | 58 mm |
| Width | 15 mm |
| Height | 73 mm |
| I&M data | Yes; I&M0 to I&M3 |
| Oversampling | No |
| Last modified | 8/7/2023 |
| Weight, approx. | 31 g |
| Diagnostic alarm | Yes |
| Isochronous mode | No |
| Power loss, typ. | 1 W |
| Rated value (DC) | 24 V |
| Usable BaseUnits | BU type A0, A1 |
| FW update possible | Yes |
| Diagnostics function | Yes |
| HW functional status | From FS03 |
| Isolation tested with | 707 V DCtype test |
| Output range scalable | No |
| Diagnoses, Group error | Yes |
| Output range, 0 to 10 V | Yes; 15 bit |
| Diagnoses, Short-circuit | Yes |
| Number of analog outputs | 2 |
| Output range, 1 V to 5 V | Yes; 13 bit |
| Product type designation | AQ 2xU ST |
| Current consumption, max. | 80 mA |
| Mechanical coding element | Yes |
| Output range, -5 V to +5 V | Yes; 15 bit incl. sign |
| Calibration possible in RUN | No |
| Reverse polarity protection | Yes |
| Cable length, shielded, max. | 200 m |
| Output range, -10 V to +10 V | Yes; 16 bit incl. sign |
| Diagnoses, Overflow/underflow | Yes |
| Substitute values connectable | Yes |
| Address space per module, max. | 4 byte; + 1 byte for QI information |
| Analog output with oversampling | No |
| Cycle time (all channels), min. | 1 ms |
| Settling time, for resistive load | 0.1 ms |
| Type of mechanical coding element | Type A |
| Reparameterization possible in RUN | Yes |
| Settling time, for capacitive load | 1 ms |
| Crosstalk between the outputs, min. | -50 dB |
| Permissible range, lower limit (DC) | 19.2 V |
| Permissible range, upper limit (DC) | 28.8 V |
| PROFIBUS from GSD version/GSD revision | GSD Revision 5 |
| PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Diagnoses, Monitoring the supply voltage | Yes |
| Load impedance with voltage outputs, min. | 2 kΩ |
| Linearity error (relative to output range) | +/- 0.03% |
| Potential separation, between the channels | No |
| Installation altitude above sea level, max. | 5000 mRestrictions for installation altitudes > 2000 m, see manual |
| STEP 7 configurable/integrated from version | V5.5 SP3/- |
| Voltage output, short-circuit current, max. | 45 mA |
| Temperature error (relative to output range) | +/- 0.005%/K |
| Diagnostics indication LED, Channel status display | Yes; green LED |
| Diagnostics indication LED, for module diagnostics | Yes; green/red DIAG LED |
| Diagnostics indication LED, for channel diagnostics | No |
| Basic error limit, Current, relative to output range | +/- 0.3% |
| Basic error limit, Voltage, relative to output range | +/- 0.3% |
| Resolution with overrange (bit including sign), max. | 16 bit |
| STEP 7 TIA Portal configurable/integrated from version | V13 SP1/- |
| Color code for module-specific color identification plate | CC00 |
| Load impedance with voltage outputs, capacitive load, max. | 1 µF |
| Operational error limit, Current, relative to output range | +/- 0.5% |
| Operational error limit, Voltage, relative to output range | +/- 0.5% |
| Potential separation, between the channels and backplane bus | Yes |
| Connection of actuators, for voltage output two-wire connection | Yes |
| Connection of actuators, for voltage output four-wire connection | No |
| Ambient temperature during operation, vertical installation, max. | 50 °C |
| Ambient temperature during operation, vertical installation, min. | -30 °C; < 0 °C as of FS03 |
| Ambient temperature during operation, horizontal installation, max. | 60 °C |
| Ambient temperature during operation, horizontal installation, min. | -30 °C; < 0 °C as of FS03 |
| Repeat accuracy in steady state at 25 °C (relative to output range) | +/- 0.05% |
| Diagnostics indication LED, Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Potential separation, between the channels and the power supply of the electronics | Yes |
| Destruction limits against externally applied voltages and currents, Voltages at the outputs | 30 V |
Если у вас не открывается документ, нажмите, чтобы открыть файл в новой вкладке.
