MCRF200-I/SNXXX
Снят с производства
Увеличить
Краткое описание:
IC,TRANSPONDER,CMOS,SOP,8PIN,PLASTIC
Дополнительная информация
The MCRF200 is a passive Radio Frequency Identification (RFID) device for low-frequency applications (100 kHz-400 kHz). The device is powered by rectifying an incoming RF signal from the reader. The device requires an external LC resonant circuit to receive the incoming RF signal and to send data. The device develops a sufficient DC voltage for operation when its external coil voltage reaches approximately 10 VPP. This device has a total of 128 bits of user programmable memory and an additional 12 bits in its configuration register. The user can manually program the 128 bits of user memory by using a contactless programmer in a microID developer kit such as DV103001 or PG103001. However, in production volume the MCRF200 is programmed at the factory (Microchip SQTP – see Technical Bulletin TB023). The device is a One-Time Programmable (OTP) integrated circuit and operates as a read-only device after programming.
| REACH | unknown |
| Military Spec | False |
| Programmability | One-Time Contactless Programmable (Developer Kit Only) |
| Temperature Grade | INDUSTRIAL |
| Terminal Position | DUAL |
| JEDEC Package Code | R-PDSO-G8 |
| Modulation Options | ASK, FSK, PSK |
| Number of Terminals | 8 |
| Storage Temperature | -65 to +150°C |
| Memory Serialization | SQTPSM |
| Data Encoding Options | NRZ Direct, Differential Biphase, Manchester Biphase |
| User Memory Size (OTP) | 96 or 128bits |
| Available Package Forms | Die, Wafer, COB, PDIP, SOIC |
| Max Operating Temperature | 85 |
| Min Operating Temperature | -40 |
| Operating Frequency Range | 100-400kHz |
| Quality Management System | ISO/TS 16949:2002 |
| Supported Memory Protocols | 48 or 64bits |
| Factory Programming Options | Yes |
| Operation Mode After Programming | Read-Only Data Transmission |
Если у вас не открывается документ, нажмите, чтобы открыть файл в новой вкладке.
