SDAT-MHS-M50-1L-SA-E-0.3-M8
Увеличить
Краткое описание:
Position Transmitter SDAT-MHS
Дополнительная информация
Hall-magnetic position transmitter with IO-Link interface, designed for T-slots, featuring robust construction and precise linear measurement capabilities.
| Design | for T-slot |
| Ce Mark | to EU directive for EMC |
| Protocol | I-Port |
| Rcm Mark | RCM Mark |
| Cable Length | 0.3m |
| Voltage Drop | 2.5V |
| Material Foil | Polyester |
| Mounting Type | Tightened, Insertable in slot from above |
| Sensing Range | 0 ... 50mm |
| Switch Output | PNP |
| Materials Note | Halogen-free |
| Product Weight | 19g |
| Status Display | Red LED |
| Switch-on Time | < 2ms |
| Analogue Output | 4 - 20mA |
| Cable Attribute | Energy chain + robot |
| IO-Link Profile | Device V 1.1 |
| Residual Ripple | 10% |
| Rohs Compliance | Conforms to RoHS |
| Setting Options | IO-Link, Pushbutton |
| Switch-off Time | < 2ms |
| IO-Link Protocol | IO-Link |
| Material Housing | Nickel-plated brass, PA-reinforced, Polyester, High alloy steel, non-corrosive |
| Protection Class | IP65, IP68 |
| Ul Certification | c UL us - Listed (OL) |
| Assembly Position | Any |
| IO-Link Port Type | A |
| Max. Travel Speed | 3m/s |
| Measured Variable | Position |
| Travel Resolution | 0.05mm |
| Polarity Protected | for all electrical connections |
| Ambient Temperature | -25 ... 70°C |
| Cable Sheath Colour | Grey |
| Max. Output Current | 100mA |
| Measuring Principle | Hall magnetic |
| Repetition Accuracy | 0.1mm |
| Ready Status Display | Green LED |
| Electrical Connection | Cable with plug, M8, 4-pin, Turnable threads |
| Material Cable Sheath | TPE-U(PUR) |
| Material of Union Nut | Nickel-plated brass |
| Max. Contact Rating DC | 2.7W |
| Short Circuit Strength | Yes |
| Special Characteristics | Oil resistant |
| Typical Linearity Error | ±0.25mm |
| Connector Exit Direction | axial |
| IO-Link Function Classes | Smart sensor profile, Binary Data Channels (BDC), Process Data Variable (PDV), Identification, diagnosis, Teach channel |
| IO-Link SIO Mode Support | Yes |
| Max. Switching Frequency | 1kHz |
| Operating Status Display | Yellow LED |
| Test Conditions of Cable | Bending strength according to Festo standard (Chain link trunking: 5 million cycles, bending radius 28 mm), Torsion resistance: > 300,000 cycles, ±270°/0.1 m |
| Typical Scanning Interval | 1ms |
| IO-Link Communication Mode | COM3 (230.4 kbd) |
| IO-Link Minimum Cycle Time | 1ms |
| Operating Voltage Range DC | 15 ... 30V |
| Switching Element Function | N/C or N/O contact, switchable |
| Material Electrical Contact | Copper alloy, Gold plated |
| Sensitivity, Current Output | 0.32mA/mm |
| IO-Link Process Data Width IN | 2Byte |
| Overload Withstand Capability | Available |
| IO-Link Process Data Content IN | 12 bit PDV (position measured value), 4 bit BDC (position monitoring) |
| Max. Load Resistance, Current Output | 500Ohm |
| Ambient Temperature (Flexible Cable Installation) | -20 ... 70°C |
Если у вас не открывается документ, нажмите, чтобы открыть файл в новой вкладке.
