VA-55
Снят с производства
Увеличить
Краткое описание:
Portable vacuum-base drilling machine for holesaws 15-55 mm, 1150 W, 350/650 rpm
Дополнительная информация
Portable vacuum-applied drilling machine that uses an ejector-effect vacuum system to hold its suction pad, fixing the body to stainless steel and thin steel sheets where conventional magnetic bases cannot be used. The 1150 W drill motor draws 12.4 A from an AC 100 V 50/60 Hz supply and runs at no-load speeds of 350 or 650 rpm. It accepts holesaws from 15 to 55 mm, cuts plates up to 6 mm thick with a 170 mm maximum stroke, and reaches an ultimate vacuum of minus85 kPa with 约0.1 m3/min air consumption. Rated operating time is 30 minutes and the machine weighs 14 kg.
| RoHS | Not Compliant |
| Body weight | 14kg |
| No-load speed | 350/650rpm |
| Rated current | 12.4A |
| Maximum stroke | 170mm |
| Supply voltage | AC 100V |
| Air consumption | 0.1m3/min |
| Ultimate vacuum | -85kPa |
| Supply frequency | 50/60Hz |
| Maximum thrust load | 1.274kN |
| Rated operating time | 30min |
| Suction pad dimensions | 200 x 300mm |
| Hole saw diameter range | 15-55mm |
| Max workpiece thickness | 6mm |
| Rated power consumption | 1150W |
